In the field of cable and wire, cable strander must be used. For the stranding machine strand, the stranding machine strand self-test, if it is the same boat layer strand, must take into account the number and size of the stranding machine pay-off disc is not integrated with it, followed by the orientation of the strand, the length of the pitch diameter and the need to untwist.
If it is a double strand, it is also necessary to take into account the shape of the strand, which requires the analysis of the strand structure, specifications and models, raw materials, and clear processing data information, and finally it is to select the right strand machine. Stranding machine strand self-test, if it is a bundle of products, in addition to the number and size of the pay-off coil, the size of the winding coil of the bundling machine is much more critical than the stranding machine.
If it is how thick a single line with how many pay-off disc, and there are no strict requirements, then it should be based on the length of the requirements to set, thin line using small wire reel, thick line using large wire reel. Generally speaking, the speed ratio of the cage winch is much lower than that of the fork winch, and the speed ratio of the fork winch is much lower than that of the tube winch. There is also a point that the common bundling machine is the way that the National Day and Mid-Autumn Festival double pitch wave shakes the blue.
As a company, the proper operation of all equipment is essential. In order to better make the production of finished products look stronger, better quality, and try to avoid damage caused by human factors, the cable stranding machine should do the following many jobs in the whole process of application:
1. Check that the electrical conductor of the strand in the upper process has no red or black condition.
2, determine the number of strands of the upper process, appropriate orientation, detailed marks, and neat lines.
3, check the package package intact, signs and specifications and processing technology regulations.
4, check the manufacturing operation process in line with the process card regulations.
5, think of the twisted wire appearance is shiny, good compression forming, missing shares, leakage line, leakage package, etc.
6, check the volume of the process to consider, the upper plate provisions, winding disk intact, line neat.